MCB Lighting & Electrical

MCB SERVICES

LIGHTING, MECHANICAL AND ELECTRICAL SOURCING/ PROCUREMENT

LOGISTICS SUPPORT/

STORAGE

ESPC/PERFORMANCE CONTRACTING

NAICS CODES

333414, 333415, 334416, 335110, 335122, 335129, 335311, 335312, 335313, 335314

plus incidental services associated with non-manufacturer

238210, 238220, 541611

PROJECTS

MCB offers product solutions that reduce total life cycle cost and environmental impact.
Displayed below is a collection of a few high-profile, noteworthy projects from the MCB portfolio of work.

Ronald V. Dellums Federal Building

Oakland, CA

Interior Lighting Project Installation
Customer: GSA Oakland
Value: $6.2M

Scope:

MCB Lighting & Electrical, under contract with Phillips, conducted energy surveys (audits) and analysis, energy conservation proposals and provided in-house installation and commissioning of a highly complex lighting system (computer controlled). MCB Lighting & Electrical replaced 16K fixtures in over 40 federal agencies located in the Ronald V. Dellums GSA Building in Oakland California.

MCB installed a complex DALI lighting system which at the time was the first in the government. This system is a programmable, addressable lighting system that facilitates the control of each lighting fixture individually from 100% down to 10%.

Ronald V. Dellums Federal Building

Oakland, CA

Interior Lighting Project Installation
Customer: GSA Oakland
Value: $6.2M

Scope:

MCB Lighting & Electrical, under contract with Phillips, conducted energy surveys (audits) and analysis, energy conservation proposals and provided in-house installation and commissioning of a highly complex lighting system (computer controlled). MCB Lighting & Electrical replaced 16K fixtures in over 40 federal agencies located in the Ronald V. Dellums GSA Building in Oakland California.

MCB installed a complex DALI lighting system which at the time was the first in the government. This system is a programmable, addressable lighting system that facilitates the control of each lighting fixture individually from 100% down to 10%.

Ronald V. Dellums Federal Building

Oakland, CA

Interior Lighting Project Installation
Customer: GSA Oakland
Value: $6.2M

Scope:

MCB Lighting & Electrical, under contract with Phillips, conducted energy surveys (audits) and analysis, energy conservation proposals and provided in-house installation and commissioning of a highly complex lighting system (computer controlled). MCB Lighting & Electrical replaced 16K fixtures in over 40 federal agencies located in the Ronald V. Dellums GSA Building in Oakland California.

MCB installed a complex DALI lighting system which at the time was the first in the government. This system is a programmable, addressable lighting system that facilitates the control of each lighting fixture individually from 100% down to 10%.

Phillip Burton Federal Building

San Francisco

State of the Art Lighting Installation
Customer: GSA San Francisco
Value: $6M

Scope:

MCB Lighting & Electrical replaced 12K fixtures in over 40 federal agencies located in the Phillip Burton Federal Building in San Francisco California. MCB installed a complex DALI lighting system which at the time was the first in the government, at least at GSA. During the GSA pilot for work station lighting MCB installed over 25K fixtures in occupied space, at multiple locations.

Major Weapons System

Naval Research Laboratory
Mechanical Infrastructure

Scope:

MCB was the first small business ever selected “sole source” to perform critical advanced electrical and mechanical systems for a new major weapon system for the Naval Research Laboratory’s (NRL) new $385M state-of-the-art radar. Even though it was not ESPC, it is similarly relatible work. MCB designed and installed a separate 35,000 volt redundant electrical service to provide resiliency and sustainability to the system.

Additionally, the complex mechanical system was created by MCB to provide Lookheed Martin, Northrop Grumman, and General Dynamics an extremely complex 8-output cooling system. This 8-output cooling system required different pressure and temperatures for an array of test systems all coming from one source – an unprecedented accomplishment. MCB also included sustainability and energy reductions with high efficiency chillers in the system and by designing a fan system which could reduce the operational cost by additional 30%.

National Park Service

Lighting Upgrade Project for National Monuments and Memorials (High-profile Washington, DC contract)

Washington, DC
Customer: National Park Service
Value: $1.6M

Scope:

MCB Lighting & Electrical sourced and delivered 4,500 specialty interior and exterior lighting in support of National Park Service. We exceeded customer expectations with flexible response on new and emerging requirements during project installation.

Major Weapons System

Naval Research Laboratory
Electrical Infrastructure

Scope:

MCB was the first small business ever selected “sole source” to perform critical advanced electrical and mechanical systems for a new major weapon system for the Naval Research Laboratory’s (NRL) new $385M state-of-the-art radar. Even though it was not ESPC, it is similarly relatible work. MCB designed and installed a separate 35,000 volt redundant electrical service to provide resiliency and sustainability to the system.

Additionally, the complex mechanical system was created by MCB to provide Lookheed Martin, Northrop Grumman, and General Dynamics an extremely complex 8-output cooling system. This 8-output cooling system required different pressure and temperatures for an array of test systems all coming from one source – an unprecedented accomplishment. MCB also included sustainability and energy reductions with high efficiency chillers in the system and by designing a fan system which could reduce the operational cost by additional 30%.

Major Weapons System

Naval Research Laboratory
Mechanical Infrastructure

Scope:

MCB was the first small business ever selected “sole source” to perform critical advanced electrical and mechanical systems for a new major weapon system for the Naval Research Laboratory’s (NRL) new $385M state-of-the-art radar. Even though it was not ESPC, it is similarly relatible work. MCB designed and installed a separate 35,000 volt redundant electrical service to provide resiliency and sustainability to the system.

Additionally, the complex mechanical system was created by MCB to provide Lookheed Martin, Northrop Grumman, and General Dynamics an extremely complex 8-output cooling system. This 8-output cooling system required different pressure and temperatures for an array of test systems all coming from one source – an unprecedented accomplishment. MCB also included sustainability and energy reductions with high efficiency chillers in the system and by designing a fan system which could reduce the operational cost by additional 30%.

Corpus Christi Army Depot (Corpus Christi, TX)

Customer: US Army
Value: $4.2M

Scope:

MCB Lighting & Electrical replaced and/or retrofitted 15,000 fixtures, resulting in estimated energy cost savings of $900k/year. This project involved turnkey lighting project development, audit, supply, and installation. MCB installed over 1200 highbay fixtures and 10,000 LED retrofit kits.

We overcame significant challenges on the project which required remote storage from the installation site and involved 20 full truckloads of lighting products. The work was in a high ops tempo operations facility that required close coordination and cooperation. We exceeded the customers expectations by being flexible, working around customers installation schedule and adjusting our retrofit areas, as needed, to meet the customers needs.

Why We Are Different

We're impacting lighting solutions everyday ...

changing how we live and work.

MCB Lighting & Electrical, Inc. under the direction of its Founder, President & CEO Charles M. Baker, an industry lighting expert with over 30 years of ESPC experience for the Department of Defense (DoD), is a SDVOSB/SDB technical sales electrical and mechanical solutions provider focused on supporting utility companies, federal government customers, and the commercial sector. We pride ourselves in providing high-performance products and project solutions. As a minority- and veteran-owned company, we leverage our high-performance solutions for utility and other partners interested in working with a high-performing, diverse small business and receiving great value and service.

MCB is a full-service company providing holistic solutions for generation, transmission, mechanical, high- and low-voltage switches and switchgear, renewable energy, LED exterior lighting, interior and intelligent lighting, electrical distribution and electric charging stations. We provide turnkey installations for our strategic manufacturing partners with our strong electrical and mechanical peer group. Our Creed is “Service Above All Else” and our value proposition is offering product solutions that reduce total life cycle cost and environmental impact.

MCB is poised to revolutionize ESPC lighting projects with true energy management. MCB delivers an enterprise architecture for a stand-alone infrastructure providing holistic solutions to enable total control of lighting systems. These solutions achieve greater energy management through individual control down to 10%, load sharing, HVAC savings, maintenance indicators, curtailment, peak demand program plus 100% M & V with historical data.

MCB leverages relationships with strategic manufacturing and contracting partners from its elite electrical and mechanical
peer group. We focus on customer value, industry compliance, total system customization, individual controllability, and integration of manufacturing into the field. The result is significant cost savings through the achievement of greater energy efficiency and management, strategic sourcing, reduced labor costs by 30% using regulation and stature. MCB reduces total energy consumption and lessens the overall impact on the environment.